Foil Drive Removable V2 Motor Cables

The Foil Drive Removable V2 Motor Cable is a replacement and customization component for Foil Drive's V2 motor system. Manufactured by Foil Drive, this cable connects the V2 motor unit to the battery controller and determines where the motor sits along the mast. The V2 generation introduced a recessed plug on the front of the motor housing, allowing riders to swap cable lengths without tools, soldering, or permanent modifications. Each cable ships with a V2 Motor Cable O-Ring to maintain a watertight seal at the connection point.

By offering multiple cable lengths, Foil Drive gives riders a straightforward way to reposition the motor on the mast rather than purchasing an entirely separate motor assembly for each setup. Shorter cables keep the motor closer to the top of the mast, while longer cables move it further down toward the fuselage.

• Compatibility: Foil Drive Assist MAX, Assist Slim, Fusion, and V2 Motor systems
• Available lengths: 12 cm (4.7"), 15 cm (6"), 20 cm (8"), 25 cm (10"), 30 cm (12"), 60 cm (23.5"), 70 cm (27.5")
• Included: One removable V2 motor cable and one V2 Motor Cable O-Ring
• Category: Spare parts — plugs and cables

This cable suits any rider already running a Foil Drive V2-compatible motor who wants to fine-tune motor placement for different disciplines or conditions. Shorter lengths in the 12–25 cm range are oriented toward assist-style foiling — wing foiling, prone foiling, or SUP foiling — where the motor is positioned higher on the mast so it clears the water once the rider is up on foil, reducing drag during flight. The longer 60–70 cm options place the motor lower on the mast, closer to the fuselage, which is more common in dedicated foil-drive or flat-water cruising setups where the motor remains submerged throughout the session.

Because swapping cables takes only seconds and requires no tools, riders who use different boards or switch between disciplines can carry a couple of lengths in their gear bag and adjust on the beach. It is also a practical spare part for anyone whose original cable has sustained wear or damage.

Within Foil Drive's parts catalog, the Removable V2 Motor Cable sits in the plugs-and-cables hardware category alongside other spare components like O-rings, clamps, and controller cables. It is distinct from the earlier fixed-cable V1 motor design, which required a complete motor purchase to change cable length. The V2 cable system is shared across Foil Drive's current product tiers — Assist MAX, Assist Slim, and Fusion — so one cable inventory covers the full motor range.

For riders comparing cost, a single cable is significantly less expensive than buying an additional complete V2 motor assembly, making it the economical path to experimenting with motor position. Competing electric foil-assist brands such as Takuma and Fliteboard use integrated motor designs that do not offer a comparable cable-swap feature, which positions Foil Drive's modular approach as a distinct advantage for riders who frequently change setups.